Metalworking fluids

Binol has a wide range of products for the metalworking industry. They are developed to give optimal technical performance and a lower Total Cost of Ownership. Naturally, these products are always developed to be as safe as possible to both human and the environment.

Products

Neat Oils
  • Binol Cut 5 (QUAKERCUT® 005 XP)

    Binol Cut 5 is an environmentally acceptable metalworking oil, based on renewable vegetable oil. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. The product is label free. Binol Cut 5 is a neat cutting oil designed for grinding, honing, super-finishing and light duty cutting operations, as well as a replacement for water-miscible emulsions in conventional machining. Binol Cut 5 is designed for machining in ferrous materials, aluminium alloys and yellow metals.
  • Binol Cut 8 (QUAKERCUT® 008 XP)

    Binol Cut 8 is a environmentally acceptable metalworking oil, based on renewable vegetable oil. The product is readily biodegradable, non toxic for human or the environment and not irritating to skin. It is a neat cutting oil designed for grinding, honing, super-finishing and general cutting operations. Binol Cut 8 is designed for machining in ferrous materials and aluminium alloys.
  • Binol Cut 10, 10EP (QUAKERCUT® 010 XP)

    Binol Cut 10 and 10EP are environmentally acceptable vegetable oil-based cutting oils. They are neat cutting oils designed for grinding, honing, superfinishing, reaming and cutting operations. Suitable for grinding in high speed steel, hardened stainless steel, hard metal with grinding wheels in materials like ceramics, boron nitride (CBN) and diamond. Binol Cut 10 is used in the automotive industry for pressing of ferrous materials, galvanized and non-galvanized, as well as aluminium alloys. Binol Cut 10EP is recommended for heavy duty machining operations such as deep hole drilling and stamping.
  • Binol Cut 20 (QUAKERCUT® 020 XP)

    Binol Cut 20 and 20EP are environmentally acceptable vegetable oil-based cutting oils for heavy duty machining operations requiring oil with high lubricating properties. They are neat cutting oils designed for gear cutting operations, turning, deep hole drilling and reaming in material such as cast iron, steel, stainless steel, yellow metals and aluminium alloys. Cut 20EP can also be used for plastic formation and tapping.
  • Binol Cut 115EP

    Binol Cut 115EP is an environmentally acceptable vegetable oil-based cutting oil with high viscosity for heavy-duty machining and low speed operations requiring oil with high lubricating properties. Is designed mainly for tapping and reaming but can also be used for plastic formation. Binol Cut 115EP is normally applied with a brush or jug.
  • Binol Spray 12 (QUAKERCUT® MQL 012 XP)

    Binol Spray 12 is an environmentally acceptable vegetable oil-based metal working oil for use in near dry machining applicators and systems. These special systems in combination with the unique lubrication properties of the oil will result in extreme low annual consumption (app. 20 litres/nozzle). The product is also recommended for operations in aluminium where the metal undergoes post heat treatment. Applied at a correct dosage, there is generally no need for additional post cleaning of components.
  • Binol Tap Paste

    Binol Tap Paste is environmentally acceptable vegetable oil-based semi fluid grease with high lubricating properties. The product is recommended for heavy-duty machining at low speed operations, mainly for tapping and drilling. Binol Tap Paste is normally applied with a brush or just by dipping the taps and drills directly in the container.
Cutting Fluids
  • Binol Cool 42i

    Binol Cool 42i is a water miscible transparent cutting fluid of microemulsion type, based on vegetable raw materials. Binol Cool 42i is a general purpose cutting fluid for machining operations, such as grinding, milling, sawing, turning, drilling and tapping of cast iron, steel, stainless steel, yellow metals and “hard” aluminium alloys.
Grinding Fluids
  • Binol Cool 12

    Binol Cool 12 is a water miscible clear grinding fluid, which provides lubricity, cooling, and corrosion protection. The product can also be used in light duty cutting operations when cooling and good chip removal properties are required.
Rust Protection Fluid
  • Binol Corr E10

    Binol Corr E10 is a water miscible fluid used for temporary corrosion protection of metal components indoors up to 12 months. The product may be applied by dipping or by spraying.
Slide Way Oils
  • Binol Slide 68, 150

    Binol Slide 68 and 150 are environmentally acceptable vegetable slide way oils. They are recommended for use in metal processing machines where Binol cutting oils is used. The products are intended for machines with central lubrication systems. Binol Slide 68 and 150 are designed to prevent stick slip on the slide ways. Not recommended in machines using water miscible cutting fluids.
Hydraulic Oils
  • Binol Hyd 32

    Binol Hyd is environmentally acceptable hydraulic oils based on specific renewable vegetable and/or synthetic esters. Binol Hyd products are recommended for mobile as well as stationary hydraulic systems under moderate to severe working conditions.
  • Binol Hyd 46

    Binol Hyd is environmentally acceptable hydraulic oils based on specific renewable vegetable and/or synthetic esters. Binol Hyd products are recommended for mobile as well as stationary hydraulic systems under moderate to severe working conditions.
  • Binol Hyd 46E

    Binol Hyd 46E is environmentally acceptable hydraulic oil based on special selected renewable synthetic esters with superior oxidation stability and longevity. The product is recommended for mobile as well as stationary hydraulic systems under severe working conditions.